The following table lists the server return codes:
Hex |
Decimal |
Description |
---|---|---|
0x00 |
0 |
LDAP_SUCCESS Indicates the requested client operation completed successfully. |
0x01 |
1 |
LDAP_OPERATIONS_ERROR Indicates an internal error occurred. The server is unable to respond with a more specific error and is also unable to properly respond to a request. It does not indicate that the client has sent an erroneous message. |
0x02 |
2 |
LDAP_PROTOCOL_ERROR Indicates that the server has received an invalid or malformed request from the client. |
0x03 |
3 |
LDAP_TIMELIMIT_EXCEEDED Indicates that the operation's time limit specified by either the client or the server has been exceeded. On search operations, incomplete results are returned. |
0x04 |
4 |
LDAP_SIZELIMIT_EXCEEDED Indicates that in a search operation, the size limit specified by the client or the server has been exceeded. Incomplete results are returned. |
0x05 |
5 |
LDAP_COMPARE_FALSE Does not indicate an error condition. Indicates that the results of a compare operation are false. |
0x06 |
6 |
LDAP_COMPARE_TRUE Does not indicate an error condition. Indicates that the results of a compare operation are true. |
0x07 |
7 |
LDAP_AUTH_METHOD_NOT_SUPPORTED Indicates that during a bind operation the client requested an authentication method not supported by the LDAP server. |
0x08 |
8 |
LDAP_STRONG_AUTH_REQUIRED Indicates one of the following:
|
0x09 |
9 |
Reserved. |
0x0A |
10 |
LDAP_REFERRAL Does not indicate an error condition. In LDAPv3, indicates that the server does not hold the target entry of the request, but that the servers in the referral field may. |
0x0B |
11 |
LDAP_ADMINLIMIT_EXCEEDED Indicates that an LDAP server limit set by an administrative authority has been exceeded. |
0x0C |
12 |
LDAP_UNAVAILABLE_CRITICAL_EXTENSION Indicates that the LDAP server was unable to satisfy a request because one or more critical extensions were not available. Either the server does not support the control or the control is not appropriate for the operation type. |
0x0D |
13 |
LDAP_CONFIDENTIALITY_REQUIRED Indicates that the session is not protected by a protocol, such as Transport Layer Security (TLS), which provides session confidentiality. |
0x0E |
14 |
LDAP_SASL_BIND_IN_PROGRESS Does not indicate an error condition, but indicates that the server is ready for the next step in the process. The client must send the server the same SASL mechanism to continue the process. |
0x0F |
15 |
Not used. |
0x10 |
16 |
LDAP_NO_SUCH_ATTRIBUTE Indicates that the attribute specified in the modify or compare operation does not exist in the entry. |
0x11 |
17 |
LDAP_UNDEFINED_TYPE Indicates that the attribute specified in the modify or add operation does not exist in the LDAP server's schema. |
0x12 |
18 |
LDAP_INAPPROPRIATE_MATCHING Indicates that the matching rule specified in the search filter does not match a rule defined for the attribute's syntax. |
0x13 |
19 |
LDAP_CONSTRAINT_VIOLATION Indicates that the attribute value specified in a modify, add, or modify DN operation violates constraints placed on the attribute. The constraint can be one of size or content (string only, no binary). |
0x14 |
20 |
LDAP_TYPE_OR_VALUE_EXISTS Indicates that the attribute value specified in a modify or add operation already exists as a value for that attribute. |
0x15 |
21 |
LDAP_INVALID_SYNTAX Indicates that the attribute value specified in an add, compare, or modify operation is an unrecognized or invalid syntax for the attribute. |
|
22-31 |
Not used. |
0x20 |
32 |
LDAP_NO_SUCH_OBJECT Indicates that the target object cannot be found. This code is not returned on the following operations:
|
0x21 |
33 |
LDAP_ALIAS_PROBLEM Indicates that an error occurred when an alias was dereferenced. |
0x22 |
34 |
LDAP_INVALID_DN_SYNTAX Indicates that the syntax of the DN is incorrect. However, if the DN syntax is correct, but the LDAP server's structure rules do not permit the operation, the server returns the following: LDAP_UNWILLING_TO_PERFORM |
0x23 |
35 |
LDAP_IS_LEAF Indicates that the specified operation cannot be performed on a leaf entry. (This code is not currently in the LDAP specifications, but is reserved for this constant.) |
0x24 |
36 |
LDAP_ALIAS_DEREF_PROBLEM Indicates that during a search operation, either the client does not have access rights to read the aliased object's name or dereferencing is not allowed. |
|
37-47 |
Not used. |
0x30 |
48 |
LDAP_INAPPROPRIATE_AUTH Indicates that during a bind operation, the client is attempting to use an authentication method that the client cannot use correctly. For example, either of the following causes this error:
|
0x31 |
49 |
LDAP_INVALID_CREDENTIALS Indicates that during a bind operation, one of the following occurred:
|
0x32 |
50 |
LDAP_INSUFFICIENT_ACCESS Indicates that the caller does not have sufficient rights to perform the requested operation. |
0x33 |
51 |
LDAP_BUSY Indicates that the LDAP server is too busy to process the client request at this time, but if the client waits and resubmits the request, the server may be able to process it then. |
0x34 |
52 |
LDAP_UNAVAILABLE Indicates that the LDAP server cannot process the client's bind request, usually because it is shutting down. |
0x35 |
53 |
LDAP_UNWILLING_TO_PERFORM Indicates that the LDAP server cannot process the request because of server-defined restrictions. This error is returned for the following reasons:
|
0x36 |
54 |
LDAP_LOOP_DETECT Indicates that the client discovered an alias or referral loop, and is thus unable to complete this request. |
|
55-63 |
Not used. |
0x40 |
64 |
LDAP_NAMING_VIOLATION Indicates that the add or modify DN operation violates the schema's structure rules. For example:
|
0x41 |
65 |
LDAP_OBJECT_CLASS_VIOLATION Indicates that the add, modify, or modify DN operation violates the object class rules for the entry. For example, the following types of request return this error:
|
0x42 |
66 |
LDAP_NOT_ALLOWED_ON_NONLEAF Indicates that the requested operation is permitted only on leaf entries. For example, the following types of requests return this error:
|
0x43 |
67 |
LDAP_NOT_ALLOWED_ON_RDN Indicates that the modify operation attempted to remove an attribute value that forms the entry's relative distinguished name. |
0x44 |
68 |
LDAP_ALREADY_EXISTS Indicates that the add operation attempted to add an entry that already exists, or that the modify operation attempted to rename an entry with the name of an entry that already exists. |
0x45 |
69 |
LDAP_NO_OBJECT_CLASS_MODS Indicates that the modify operation attempted to modify the structure rules of an object class. |
0x46 |
70 |
LDAP_RESULTS_TOO_LARGE Reserved for CLDAP. |
0x47 |
71 |
LDAP_AFFECTS_MULTIPLE_DSAS Indicates that the modify DN operation moves the entry from one LDAP server to another and thus requires more than one LDAP server. |
|
72-79 |
Not used. |
0x50 |
80 |
LDAP_OTHER Indicates an unknown error condition. This is the default value for NDS error codes which do not map to other LDAP error codes. |
Copyright © 2013 CA.
All rights reserved.
|
|